粉體行業在線展覽
FT-8300
面議
ROOKO
FT-8300
2971
10-13
粉體是個復雜的系統工程,兼顧著液相、氣相、固相的多種性質特征,這些特征存在于粉體生產加工、傳輸、倉儲、運輸等方方面面,研究粉體的氣相對抗能力,帶電荷能力,溫度和濕度與固結應力/時間能力;綜合分析粉體物料對抗外部及內部本體的性質能力,表征粉體流動能力;對粉體的臨界分析,未來預測分析提供數據模型圖譜.
研究院
大專院校
FT-3800粉體流變分析系統
FT-3800 Powder rheological analysis system
一.描述Description:
粉體是個復雜的系統工程,兼顧著液相、氣相、固相的多種性質特征,這些特征存在于粉體生產加工、傳輸、倉儲、運輸等方方面面,研究粉體的氣相對抗能力,帶電荷能力,溫度和濕度與固結應力/時間能力;綜合分析粉體物料對抗外部及內部本體的性質能力,表征粉體流動能力;對粉體的臨界分析,未來預測分析提供數據模型圖譜.
powder is a complex system engineering, and also give consideration to the various properties of liquid phase, gas phase and solid phase characteristics, these characteristics run through the powder production and processing, transmission, storage, transportation and so on, by studying the gas phase resistance of powder, take charge capacity, temperature and humidity and consolidation stress/time ability;A comprehensive analysis of the properties of powder materials against external and internal bodies, and the ability to represent the flow of powder;The critical analysis of the powder is analyzed, and the data model Graph is provided for future prediction analysis.
二、功能介紹:Function Introduction
采用自控模式,設定功能,自動完成項目并自動通過曲線圖譜分析;分析粉體受到剪切力時與粉體帶電荷(阻抗);剪切力與氣相(“吸收”氣相和“呼出”氣相)對抗的能力;體積密度與氣相對抗能;時間固結與氣相對抗能的變化;溫濕度變化與剪切力和氣相變化.中英文兩種語言,操作簡潔,適用于對粉體氣相表征及粉體流動能力的分析與研究
Adopt intelligent control mode, set up function, complete the project automatically and automatically analyze the curve.The analysis of the shear force of the powder body and the charge (impedance) of the powder.The ability to resist with the gas phase (" absorption "and" exhalation ").Volume density and gas phase antagonistic energy;Time consolidation and gas phase antagonism can change;With shear force gas phase change temperature and humidity changes. In both Chinese and English two languages, simple operation, suitable for powder gas phase characterization and powder flow ability of analysis and research.
三、適用范圍scope of application
應用于科研院所,大中專院校,研發部門,質量檢測機構;適用于具有氣相特性之粉體.
It is widely used in research institutes, colleges and universities, research and development departments, and quality inspection agencies.Applicable to all powders with gas phase characteristics.
四.標準standard:
參照ISO8130-5:1992;《GB/T 21782.5-2010 粉末涂料 第5部分:粉末空氣混合物流動性的測定》,并改進性研究,也適用于具有測試原理及類似性質標準要求的物料.
With reference to ISO8130-5:1992;The GB GB/T 21782.5 2010 powder coating Part 5: determination of air mixture powder liquidity, in-depth study and improve, also apply to the international general standard testing principle and similar properties standard requirements.
五.技術參數:Technical parameters
1.氣壓范圍:0-50MP Pressure range 0-50MP
2.剪切速度:1-3mm/min Shearing velocity 1-3mm/min
3.樣品量:200-300ml Sample amout200-300ml
4.電荷(阻抗):10^ 3-10^16次方
Charge (impedance) : 10^ 3-10^16 power of 16
5.密度范圍:0-9999.999g/s Density range: 0-9999.999g/s
6.剪切力:0-5MP Shear force:0-5MP
7.溫度范圍:0-500度 Temperature range: 0-500 degrees
8.通訊接口:USB,RS-232,接口
Communication interface: USB, RS-232, interface
9.電源:AC220V+10% /50Hz Power Supply : AC220V + 10% / 50Hz
LHTG/LHTM/LHTW
Empyrean
V-Sorb4800-金埃譜
EMIA-820V
Hydrolink
Autoflex R837
3H-2000A
SQL810C/1010C
UNI800B
電磁波波譜濃度儀
略