粉體行業在線展覽
50
1萬元以下
50
293
陶瓷鮑爾環填料是一種高徑相等的開孔環型填料,鮑爾環每層窗孔有5個舌葉,每個舌葉內彎指向環心,上下兩層窗孔的位置相反錯開,一般開孔面積約占環壁總面積的30%左右。
Ceramic Bauer ring filler is a kind of high diameter equal diameter open hole ring filler, Bauer ring each layer of window holes have 5 tongue leaves, each tongue leaf curved inward to the ring center, the position of the upper and lower two layers of window holes is oppositely staggered, the general opening area accounts for about 30% of the total area of the ring wall.
陶瓷鮑爾環填料是一種新型填料,是針對拉西環的一些主要缺點加以改進而出現的,是在普通拉西環的壁上開八層長方形小窗,小窗葉片在環中心相搭,上下面層窗位置相互交搭而成。
Ceramic Bauer ring filler is a new type of filler, which is improved for some of the main shortcomings of the Lassi ring, which is to open eight layers of rectangular small windows on the wall of the ordinary Lassie ring, and the small window blades are matched in the center of the ring, and the upper and lower window positions intersect with each other.
陶瓷鮑爾環與拉西環填料的主要區別是在于在側壁上開有長方形窗孔,窗孔的窗葉彎入環心,由于環壁開孔使得氣、液體的分布性能較拉西環得到較大的改善,尤其是環的內表面積能夠得以充分利用。
The main difference between it and the Lassie ring packing is that there are rectangular window holes on the side wall, and the window blade of the window hole is bent into the ring center, because the distribution performance of gas and liquid is greatly improved compared with the Lassi ring, especially the inner surface area of the ring can be fully utilized.
鮑爾環這種結構改善了汽液分布,利用了環的內表面,從而使得填料塔內的氣體和液體能夠從窗體自由通過。
The structure of the Bauer ring improves the vapor-liquid distribution, utilizing the inner surface of the ring, so that the gases and liquids inside the packing tower can pass freely from the form.
三、適用范圍(Scope of application)
適用于二氧化碳脫氣塔、臭氧接觸反應塔等作為接觸填料及其它反應塔。
Suitable for carbon dioxide deaeration tower, ozone contact reaction tower, etc. as contact packing and other reaction towers.
鮑爾環填料具有通量大、阻力小、分離效率高及操作彈性大等優點,在相同的降壓下,處理量可較拉西環大50%以上。
Bauer ring packing has the advantages of large flux, small resistance, high separation efficiency and large operating elasticity, and under the same pressure reduction, the processing capacity can be more than 50% larger than that of Rassy ring. At the same throughput, the pressure reduction can be reduced by half, and the mass transfer efficiency can be increased by about 20%.