粉體行業在線展覽
粉體行業在線展覽
直接聯系
南京天煌機械有限公司
面議
5390
技術參數：
適用于在高溫下易分解，聚合和變質的熱敏性物料的低溫干燥；被廣泛地采用在制藥、化工、食品、電子等行業。
It is suitable for drying heat sensitive raw materials that can decompose or polymerize or deteriorate at high temperature. It is widely used in pharmaceutical, chemical, foodstuff and electronic industries.
所謂真空于燥，就是將干燥物料處在真空條件下，進行加熱干燥，如果利用真空泵進行抽氣抽濕，則加快了干燥速率。
注：如采用冷凝器，物料中的溶劑可通過冷凝器加以回收：如溶劑為水，可不用冷凝器，節省能源投資。
It is well known that vacuum drying is to put raw material under the state of vacuum for heating and drying. If use vacuum to pump air and humidity out, the dry speed will be faster.
Note: if use condenser, the solvent in raw material can be recovered. If the solvent is water, condenser might be canceled and the investment and energy could be saved.
◆ 真空下物料溶液的沸點降低，使蒸發器的傳熱推動力增大，因此對一定的傳熱量可以節省蒸發器的傳熱面積。
◆ 蒸發操作的熱源可采用低壓蒸汽或廢熱蒸汽。
◆ 蒸發器熱損失少。
◆ 在干燥前可進行消毒處理，干燥過程中無任何不純物混入，符合GMP要求。
◆ 屬于靜態真空干燥器，故干燥物料的形體不會損壞。
◆ Under the condition of vacuum, the boiling point of raw material will decrease and make the evaporation efficiency higher. Therefore for a certain amount of heat transfer, the conducting area of dryer can be saved.
◆ The heat source for evaporation may be Iow pressure steam or surplus heat steam.
◆ The heat loss is less.
◆ Before drying, the treatment of disinfection may be carried out. During the period of drying, there is no impurity material mixed. It is in conformity with the requirement of GMP.
◆ It belongs to static dryer. So the shape of raw material to be dried should not be destroyed.
