粉體行業在線展覽
粉體行業在線展覽
直接聯系
菲立化學工程（上海）有限公司
面議
2426
--
概述/General Introduction
固定床反應器裝填有固體催化劑或固體反應物用以實現多相反應過程的一種反應器。固體物通常呈顆粒狀，粒徑2～15mm左右，堆積成一定高度（或厚度）的床層。床層靜止不動，流體通過床層進行反應。
The fixed bed reactor is a reactor filled with a solid catalyst or a solid reactant foe the realization heterogeneous reaction. Solid matter is usually granular granular particle size of about 2-15mm ,stacked into a certain height on the bed .the bed is stationary and the liquid reacts through the bed.
流化床反應器是一種利用氣體或液體通過顆粒狀固體層而使固體顆粒處于懸浮運動狀態，并進行氣固相反應過程或液固相反應過程的反應器。
The fluidized bed reactor is a reactor in which the solid particles are in a suspended state by means of a gas or a liquid through a solid layer and subjected to a gas-solid or liquid-solid reaction .
優勢/Advantage
固定床反應器的優點： The advantages of a fixed bed reactor | 返混小，流體同催化劑可進行有效接觸 Small back mix, the fluid can be effectively contacted with the catalyst 催化劑機械損耗小 The catalyst has a small mechanical loss 加氫反應安全、可靠、穩定 Hydrogenation is safe, reliable and stable 采用模塊化設計，通用性強，便于安裝維護 Modular design, versatility easy to install | 實現溫度、壓力、液位、流量等自動控制 Achieve the temperature pressure, liquid level, flow and others automatic control 自動和手動雙模塊控制相結合；便于操作 Automatic and manual dual module control combined easy to operate 設立反應條件高低限報警 Reaction conditions high and low limit alarm can be set |
流化床反應器的優點： advantages of fluidized bed reactors | 可以實現固體物料的連續輸入和輸出 Continuous input and output of solid materials 便于進行催化劑的連續再生和循環操作，適于催化劑失活速率高的過程的進行 Easy to realize the continuous regeneration and circulation suitable for the high catalyst deactivation rate reaction process | 流體和顆粒的運動使床層具有良好的傳熱性能，床層內部溫度均勻，而且易于控制，特別適用于強放熱反應 The movement of the liquid and the particles makes the bed have good heat transfer performance the bed temperature is uniform and easy to control particularly suitable for strong exothermic reactions |
主要技術參數/Main Technical Parameters
